Danfoss EBI 1P 052F0040 Ignition Transformer
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The Danfoss EBI 1P 052F0040 is a high-frequency electronic ignition unit designed to deliver a powerful, reliable ignition spark for gas and oil burners. Featuring a highly compact and lightweight design, it utilizes advanced solid-state technology to generate high output voltage (e.g., 15kV or 2x7.5kV) while maintaining exceptionally low power consumption and minimizing electromagnetic interference (EMI). It complies strictly with EN 55014/EN 55104 standards, guaranteeing safe and continuous cold-start performance.
Technical Specifications
Component Type
High-Frequency Ignition Unit
Output Voltage
15 kV (Single-pole)
Primary Voltage
230V AC 50/60Hz
Duty Cycle
Intermittent (e.g., 33% in 3 min)
Approvals
CE, EN 61558-2-3
Selection Notes & Data Verification
The EBI 1P 052F0040 page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Models
Related Knowledge
FAQ
What is Danfoss EBI 1P 052F0040 used for?
Danfoss EBI 1P 052F0040 is referenced as a ignition transformer for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can EBI 1P 052F0040 replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing EBI 1P 052F0040?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if EBI 1P 052F0040 fits your combustion chamber and backpressure requirements.
Contact Engineering