Weishaupt LMV37 410A2WH Flame Detector
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The Weishaupt LMV37 410A2WH is an advanced digital combustion manager (Burner Control Unit) engineered to provide unmatched precision, safety, and operational efficiency for Weishaupt burners. By electronically integrating fuel-air ratio control, flame supervision, and operational sequencing into a single, compact microprocessor-based unit, it eliminates mechanical hysteresis. This results in optimized combustion, significantly reduced fuel consumption, and ultra-low NOx emissions. It features integrated eBUS / Modbus communication for seamless BMS (Building Management System) integration.
Technical Specifications
Component Type
Burner Management System (Siemens/Weishaupt OEM)
Control Method
Electronic Fuel-Air Ratio Control
Communication
eBUS / Modbus RTU
Safety Standard
EN 298 / SIL 3 compliant architecture
Key Feature
Integrated flame supervision and VSD control capability
Selection Notes & Data Verification
The LMV37 410A2WH page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Models
Related Knowledge
FAQ
What is Weishaupt LMV37 410A2WH used for?
Weishaupt LMV37 410A2WH is referenced as a flame detector for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can LMV37 410A2WH replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing LMV37 410A2WH?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if LMV37 410A2WH fits your combustion chamber and backpressure requirements.
Contact Engineering