Lamtec FFS08 UV-1/5M Flame Detector
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The LAMTEC FFS08 UV-1/5M is an advanced industrial flame scanner engineered for the reliable and fail-safe detection of combustion flames in high-demand environments. Utilizing state-of-the-art UV or IR sensing technologies, it accurately discriminates between the target flame and background radiation or adjacent burners. Compliant with SIL 3 / EN 298 standards, this detector seamlessly integrates with LAMTEC burner management systems (such as ETAMATIC and BT300) to ensure optimal combustion safety and continuous operational availability.
Technical Specifications
Sensor Technology
UV (Ultraviolet)
Safety Integrity Level
SIL 3 (IEC 61508) Capable
Housing Material
Robust industrial casing
Compatibility
LAMTEC ETAMATIC, BT300, FMS
Approvals
CE (EN 298), UL, FM
Selection Notes & Data Verification
The FFS08 UV-1/5M page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Models
Related Knowledge
FAQ
What is Lamtec FFS08 UV-1/5M used for?
Lamtec FFS08 UV-1/5M is referenced as a flame detector for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can FFS08 UV-1/5M replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing FFS08 UV-1/5M?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if FFS08 UV-1/5M fits your combustion chamber and backpressure requirements.
Contact Engineering