Lamtec 662R2127-006 Flame Detector
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The LAMTEC 662R2127-006 (662R series) is an ultra-precise electronic servomotor developed specifically for the positioning of air dampers, gas butterfly valves, and fuel oil regulating valves in combustion systems. Engineered to work seamlessly with LAMTEC controllers (ETAMATIC, BT300, FMS), it provides exceptional positioning accuracy (up to 0.1° resolution) and high repetitive precision. This robust actuator is instrumental in maintaining the exact air-fuel ratio required for low-NOx, high-efficiency burner operation.
Technical Specifications
Actuator Type
High-Precision Electronic Servomotor
Positioning Resolution
Up to 0.1°
Control Interface
Direct drive via LAMTEC BMS
Feedback Potentiometer
High-linearity conductive plastic
Protection Class
IP 54 (Standard) / IP 65 (Optional)
Selection Notes & Data Verification
The 662R2127-006 page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Models
Related Knowledge
FAQ
What is Lamtec 662R2127-006 used for?
Lamtec 662R2127-006 is referenced as a flame detector for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can 662R2127-006 replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing 662R2127-006?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if 662R2127-006 fits your combustion chamber and backpressure requirements.
Contact Engineering