Kromschroder BCU370WI1FEU0D3 Flame Detector
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The Kromschroder BCU370WI1FEU0D3 is an advanced automatic burner control unit engineered for the safe ignition, monitoring, and control of industrial gas burners. Developed under the Elster/Honeywell Thermal Solutions portfolio, it provides continuous operation capabilities for directly ignited or pilot-ignited burners. Its authoritative microprocessor-based architecture ensures precise sequencing and flame supervision, adapting to complex multi-burner systems. Fully compliant with EN 298 and CE certified, it is a definitive standard in metallurgical, ceramic, and high-temperature processing industries.
Key Features
- Component Type: Automatic Burner Control Unit
- Application: Continuous and intermittent operation of industrial gas burners
- Safety Architecture: Microprocessor-controlled with comprehensive self-diagnostics
- Approvals: CE certified according to EN 298, SIL 3 capable (depending on setup)
- Display/Interface: Integrated LED/LCD status display for rapid fault diagnostics
Technical Specifications
Operating Voltage
230 V AC / 115 V AC (Model Dependent)
Protection Class
IP 54
Mains Frequency
50/60 Hz
Safety Time
Adjustable (e.g. 3s, 5s, 10s)
Flame Sensor
Ionization or UV (UVS/UVC)
Selection Notes & Data Verification
The BCU370WI1FEU0D3 page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Models
Related Knowledge
FAQ
What is Kromschroder BCU370WI1FEU0D3 used for?
Kromschroder BCU370WI1FEU0D3 is referenced as a flame detector for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can BCU370WI1FEU0D3 replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing BCU370WI1FEU0D3?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if BCU370WI1FEU0D3 fits your combustion chamber and backpressure requirements.
Contact Engineering