Dungs FRS515 Flame Detector
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The DUNGS FRS515 is a zero-governor/pressure regulator offering unparalleled stability in maintaining constant downstream gas pressure. Utilizing a high-performance compensating diaphragm and an internal sensor pulse, it eliminates inlet pressure fluctuations to deliver a highly accurate gas supply to the burner head. This regulator is fully compliant with EN 88-1 and is crucial for achieving optimal air-fuel ratios, thereby maximizing combustion efficiency and minimizing emissions.
Technical Specifications
Regulator Class
Class A, Group 2 (EN 88-1)
Max Inlet Pressure
500 mbar (50 kPa)
Output Pressure Range
Adjustable via interchangeable springs
Housing Material
Die-cast Aluminum
Ambient Temperature
-15°C to +70°C
Selection Notes & Data Verification
The FRS515 page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Knowledge
FAQ
What is Dungs FRS515 used for?
Dungs FRS515 is referenced as a flame detector for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can FRS515 replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing FRS515?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if FRS515 fits your combustion chamber and backpressure requirements.
Contact Engineering