Azbil ECM3000D213C Flame Detector
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The Azbil ECM3000D213C is an authoritative electric control motor (actuator) engineered for the precise positioning of industrial burner dampers, valves, and flow control mechanisms. Equipped with a highly durable gear train and offering robust torque outputs, it ensures accurate air-fuel ratio modulation in demanding industrial environments. Its versatile control inputs (proportional, floating, or 2-position) make it a fundamental component in achieving optimal combustion efficiency and emissions reduction.
Technical Specifications
Actuator Type
Electric Control Motor
Control Input
4-20 mA, 0-10 V, or Floating (Model dependent)
Rotation Angle
90° or 160° (Adjustable)
Torque Output
Up to 12.5 Nm
Protection Class
IP 54 / NEMA 3
Selection Notes & Data Verification
The ECM3000D213C page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Models
Related Knowledge
FAQ
What is Azbil ECM3000D213C used for?
Azbil ECM3000D213C is referenced as a flame detector for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can ECM3000D213C replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing ECM3000D213C?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if ECM3000D213C fits your combustion chamber and backpressure requirements.
Contact Engineering