Riello RG5D Gas Burner
Technical specs, application notes, replacement checks, and related model references.
Product Overview
The Gulliver RG5D is a two-stage light oil burner designed for home and light industrial applications, featuring low noise and high reliability.
Key Features
- Two-stage operation
- Compact design
- Low noise level
Technical Specifications
Capacity (kW)
95 - 296 kW
Operation Mode
Two-stage
Fuel Type
Light Oil
Selection Notes & Data Verification
The RG5D page is structured for engineering comparison: confirm the product type, firing range, fuel type, operating mode, electrical supply, and safety approvals against the manufacturer datasheet before specifying the burner or component.
Burner.wiki normalizes product data for discovery and comparison, but final selection should account for combustion chamber backpressure, local emission limits, control sequence requirements, and site commissioning conditions.
Typical Applications
Related Models
Related Knowledge
FAQ
What is Riello RG5D used for?
Riello RG5D is referenced as a gas burner for industrial combustion systems. Verify the exact application against the burner documentation, control cabinet wiring, and manufacturer datasheet.
Can RG5D replace another model?
Replacement depends on voltage, safety timing, wiring terminals, flame supervision method, mechanical fit, and local combustion safety requirements.
What should be checked before installing RG5D?
Check supply voltage, burner sequence, fuel type, pressure or capacity range, detector compatibility, safety loop configuration, and the equipment nameplate before commissioning.
Documentation Note
Technical documentation should be verified against the manufacturer datasheet, burner cabinet wiring diagram, and equipment nameplate before installation or replacement.
- Check supply voltage and frequency.
- Confirm terminal layout and safety interlocks.
- Verify flame detector or actuator compatibility.
Need Engineering Help?
Our experts can help you verify if RG5D fits your combustion chamber and backpressure requirements.
Contact Engineering